General Dialogic Discussion By Subject
- # of rings before answer
- .NET
- .NET support in CT-ADE
- /usr/dialogic/bin/voxctl: No vector for: briD1
- 16383 Could not start dialogic service
- 2 NFAS questions
- 2 PCCS6 in one system?
- 20th call to dx_stopch hangs
- 24 B Channels in D/240SC-T1
- 240SCT1 ISDN NI2 and Siemens Switch
- 24k ADPCM file can not be played on D41JCT
- 3902 sets on Meridian supported?
- 4ESS and cc_AcceptCall fails
- 5.1.1 SP1 drivers cause lock up on DCM startup
- 5ESS trouble getting the D Channel working
- 6.0 install undable to locate setup.ins
- 7 boards in 1 machine wont work...
- [No Dialtone detected]
- A customer complaining of errors 3212, 3214,3224
- A Simple Redhat 7.n & SR5.1 question? I hope!
- ACPI, Phoenix Bios, D/240SC-T1 Problems
- Activating TD42_ASYNCCALLID message with D/42
- adding a sleep time?
- Advice on Board to buy
- Advise about DM/V600A-2E1-PCI
- ADX #incoming calls
- ADX Conference-Object: How to add a party?
- ADX FAX-Object: How to change the Font Size?
- after gc_OpenEx success not receive GC events
- ag_unlisten() and nr_scunroute fail on VFX/40 ESC
- Alarm: DTE1_RRA
- ALaw and GAMMALINK configuration
- alaw/mulaw 8khz/11khz
- Algo for Event Handling For Digital Lines
- Alternate cc_Restart() for Linux
- Alternative
- analog / dti devices
- analog boards perfect call analysis question
- Analog Call Logging
- ANI in Sprint Canada, help
- Answering call after 2 rings
- Answering machine detection
- Answering Machine Detection For Incoming calls
- Answering machine detection vs. Voice detection
- Anybody using DM/V480 2T1 cards in Linux 5.1
- Anyone else having this problem... Fax card hangs
- Anyone seen a prob. like this fax over colt isdn
- Anyone using a CT/0408LS-A board?
- API Borland Delphi
- API for Board Serial Number
- application crash, tips to debug
- Application don't receive 'GCEV_NOTIFY
- Application Error when using libfaxmt.dll
- Application has generated illegal operation...
- ASR with Microsoft SAPI
- Assigning Mediaresource to second span D/300SC-2E1
- Asyn Windows Callback Model !!! (URGENT)
- async recording at off-hook
- ATDX_CHNAMES for network devices
- Audio format for D/41D
- Audio from all channels mixed on D/4PCI
- Audio Interface Card Question
- audio playback after bridge not working...
- Auto hang up doesn't work
- Autodialer Aplication
- Avaya G3 - Dialogic T1 Media Board Integration
- Avaya/Lucent MAPD Question
- Back to back test
- bad docu INTEL SS7 GetSigInfo
- Bad fax quality through SCbus
- barge-in with D/41EPCI SR 5.1.1
- Bargein Docs
- Basic faxing does not work on linux system
- Basic question on events
- best D/4PCI wav quality setting
- better call progress?
- Blind Transfer
- Blind Transfer on D41JCTLS
- Blocking caller ID on Euro-ISDN
- Blocking on 120 channels on DMV1200
- Board Found but Channels Not Detected
- Board LINEDEV for analog.
- Board Recommendation
- Board VFX/40 ESC Plus
- Boardserver service failed SR 5.1.1 FP1
- BRI application
- BRI/2 and DI/SI16R2 it's just choice ?
- BRI/2VFD & TAPI
- BRI/2VFD installation
- BRI/80-PCI
- BRI/80PCI
- Bridging conference
- Bridging two channels
- Bug in SR5.1 SP1 for Linux?
- Bug/typo in inc/dlgctypes.h?
- Building one IVR for Analog,T1 and E1 cards
- C Code for Speak currency or number prompt
- C#
- Call logging API under linux
- Call Logging Programer for Dialogic Card DM/V1200-
- Call Manager and Windows Server 2003 SP1?
- Call progress analysis returning an unknown value
- call progress analysis using ATDX_CPTERM
- Call Received' but line does not get off hook...
- Call termination in CTADE Tool
- Call Transfer method question
- Call transfer on Nortel PBX
- Call Transfer with CT ADE
- Call Transfer with D41/JCT-LS
- call transfer within EURO ISDN
- Call Transfering
- Call waiting beep disconnects call.
- CAller Id BRAZIL !!
- Caller ID detection
- Caller ID detection for incoming call
- Caller Id Detection Problem
- Caller ID in Canada
- Caller ID Information
- CALLER ID on ISDN PRI???
- Caller Id Problem !!
- Caller Id Problem on D/120JCT
- Caller ID with Visual Voice Pro 4.0
- CallerId after 1 call, answer after 6 calls?
- CallerId after 1 call, answer after 6 calls???
- CallerID problem
- CallerID using dx_TxIottData problem w/MSI
- calling number should be changed
- Calling Party Number '0090
- CallingNumberType not assign in 0x02(national)
- Can DM/IP040-LSI work on Windows 2000?
- can I use CSP to cancel echo in a conference?
- Can I use GlobalCall with the HIZ Monitor Board?
- Can make outgoing calls, but get busy on incoming
- Can not received any kind of data using dx_rxiottd
- Can only use first T-1 B channel on D/240JCT-T1
- Can PRI T1 timeslot routes to PRI E1 Timeslot?
- Can you get caller ID in New Zealand?
- Can't dial or receive calls with a DM/V480A-2T1
- can't find device
- can't get digit at D/240SC-T1
- Can't make outbound call on digital line
- can't run demos on linux-wont accept a device list
- can't run SIP UserAgent with Dialogic IPLink
- can't use gc_SndMsg (SndMsg_StatusEnquiry) on DM3
- Cannot dial a call using the dail box in the CTADE
- cannot find dialogic.cfg file
- Cannot hear voice - D300JCT E1 IDSN CTR4
- Cannot install SR511
- Cannot receive disconnect tone on Analog board
- Cannot send Fax reliably
- Cannot Start 2 D/41 EPCI Boards at same time.
- cant connect my E1
- Cant hear voice resource & ringback
- Cant load SR511 on System
- Capturing Caller ID. via a Dialogic VFX40ESC Plus
- CAS Topaz profile
- Catching a Runtime Error
- cc_makecall and busy
- CCMSK_DIALING_ENABLE for DM3 vs Springware
- CDP
- CDP package for India with Global Call 4.0
- Change Board
- Change dosconnect frequency
- change dtmf detect sensitivity at runtime
- Change to new boards
- Changing PrmAGCk for DM/V600A
- Changing rings number of outbound call
- Channel is Unaccepteble
- channel not released on T1 w. DMV960A
- check fax availblity in PRI cross over cable
- Check the status of line on the other end
- Chinese analog Caller id format
- cic mis match problem
- CID and TAPI
- CLI info on D41/ESC
- Clock source question
- clock speed
- CM2 and CTC 5.0
- Code Request
- collecting digits from the device digit buffer
- Command line control of dialogic start/stop
- CompactPCI SS7 CPM8 (advanced question)
- Compaq Proliant ML350 problems
- comparing wave files
- Compatibility
- Compatibilty of SR 5.1 with .Net
- Conference and call transfer using global call api
- Conference problem with DI/SI16R2
- Conference problem with DM3 Boards
- conferencing
- conferencing in coach mode
- Conferencing in DISI32 board
- Conferencing problem in DISI32 board
- Conferencing using DI/SI-24
- Conferencing with DM/V600A-2E1
- Config dialog/4
- Configuration Problem
- configure ct ade profile
- Configuring 5ess on E1 card
- Configuring a D/4PCI for an Elmeg ICT46 analog ext
- Configuring gateways
- Connecting 2 calls
- Connecting a handset. Which Dialogic model?
- connecting d/240pci-t1
- Connecting D/300JCT-E1 with Nortel Line side E1
- connecting to Definity using line side T1 ISDN
- Connecting trunk and line side E1
- Connecting two boards on two computers
- Connection due to cadence break when using PCA
- Connectivity problem between D/600 and Meridian81c
- Control the number of rings with gc_MakeCall
- Controlling the sent packets by D/320 'Firmware
- Conversation becomes one-way in middle of call
- Converting CAS to PRI
- Converting from analog interface to PRI-T1 on CP12
- Correct MAKECALL_BLK for an E1 line in the UK
- CP/100 Compatibility
- CP12SC compatibility
- CPA Adjustments for dx_dial under DM3
- CPA setting for post-connect ONLY?
- cPCI Maximum Installed Boards
- CPE Gateways for E1
- CPI/100? Faxboard drivers
- Cpi/200b ch b not answering call
- cpi/400 and DL380
- CPI/400 BRI PCI FAX BOARD
- CPI/400 PCI on Win2003
- CPI400 channel 2 test
- CPI400 Fax using CT-ADE
- CPi400B2 and PCI-X
- CPU fail-over package for DM/V cPCI boards?
- CR_CEPT and 0Hz tones.
- CR_NORB on outbound CALLP T1
- CreateMutex Error on TrunkAssign (CT ADE)
- CSP ec_reciottdata and DX_MAXSIL
- CST DE_SILON detection
- CSTA
- CT ADE - E1 R2 problem
- CT ADE - Setting Calling Party Name
- CT ADE and D/240 JCT T1 Card Issue
- CT ADE and SAPI
- CT ADE and SS7
- CT ADE and VB.NET
- CT ADE Call Transfers with HMP?
- CT ADE hardware key question
- CT ADE HMP and FAX R4FxFAX
- CT ADE MediaPlayMoney Dollar amount WITHOUT cents?
- CT ADE on a T1
- CT ADE recording conversations
- CT ADE SIP RFC 2833 - Failed Calls
- CT ADE Topaz func to set chan in Maintenace mode
- CT ADE USB Key Problem
- CT ADE: Unable to accept incoming calls
- CT-ADE and MySQL
- CT-ADE and play/rec from custom data source ?
- CT-ADE and speechpearl
- CT-ADE RLL & dx_setuio
- CT812 obsolete
- CTADE
- CTADE 8.3 Add Database Dialog does not add datbase
- CTADE 8.3update.zip for SR6 and SR 5.1.x
- CTADE and T1
- CTADE CREATE PROFILE ERROR
- CTADE support how long
- CTADE threading model
- CTADE, Intel Dialogic, C#
- CTADE/Voicebocx error: QueryInterface
- CTC Events handling: Nortel vs Lucent Definity
- CTSQL Flow Suite for Analog,T1 and E1
- Customized Disconnection Tone Sample
- D 240PCI-T1 W/TAPI---PLEA FOR HELP!
- D 480SC-2T1
- D Channel
- D Channel Down on ISA/PCI mix Cards
- D-160SC-LS & Visual voice pro5
- D-channel problems... help!
- D/120 fails to hang up on Nortel Meridian
- D/120 JCT LS Caller ID problem
- D/120 JCT LS PCI Card
- d/120JCT install under win 2000
- D/120JCT-LS and Microsoft .NET Speech SDK?
- D/120JCT-LSU PCI slot type
- D/121A + LSI/120 SR 5.1.1 ?
- D/121B w/ LSI/120 - How do I set this up?
- D/160SC-LS problem: No ringback detected
- D/160SC-LS Rev2 WinXP Pro SP2
- D/160SC-LS-HIZ - - LS Frontend
- D/160SCLS Hiz Question
- D/160SCLSHiz
- d/21h dosen't hang up
- D/240 integration
- D/240, D/300 - ISDN capable right out of the box?
- D/240JCT jumpers (CT bus)
- D/240JCT-T1 ISDN T1 Avaya D Channel problem
- D/240PCI-T1 and Windows2003
- D/240PCI-T1 Initialization Error
- D/240PCI-T1 problem w/ PRI
- D/240PCI-T1 vendor
- D/240SC-1T1 ISDN PRI?
- d/240sc-T1
- D/240sc-t1 and VFX/40ESC CTADE
- D/240SC-T1 ESF off hook with all ABCD bits?
- D/300JCT-E1 and D/600JCT-2E1 on the one server?
- D/300PCI E1 + Linux
- D/300PCI-E1
- D/300PCI-E1 compatibility with HP Proliants
- D/300SC with Line Side E1 Nortel
- d/300sc-e1
- D/300SC-E1 and LSI/161SC
- D/300SC-E1 DASS2 network side
- D/300SC-E1 VV5
- d/4 half isa drivers for win98
- D/4 PCI getting correct PCD and FCD Files
- D/4 PCI Terminal Server Fail to Load ...
- D/4 pci wave format
- D/4 PCI: The answering machines detecting problem
- D/40B Driver where Can I get
- D/41 JCT not hanging up
- D/41D or Dialog/4 on Linux SR5.1 ?
- D/41E setup
- D/41E-AN variant identification
- D/41E-FR sr_getboardcnt ?
- D/41EPCI 6.0 drivers and Windows 2003
- D/41EPCI Analog channel rerouted to their associat
- d/41epci driver?
- D/41EPCI Install Problem
- D/41EPCI Not Detected (?)
- D/41epci SR5.1.1 install - driver
- D/41EPCI Unable to dial after routing two lines
- d/41esc and xppro
- D/41ESC configuration and d40drv.exe load
- D/41ESC DOS driver?
- D/41ESC Install Problems on Win2K SP4
- D/41ESC Library file
- D/41H - Doesn't detect hang-up. (UK)
- D/41H Installation Instructions for Windows 98
- d/41jct
- D/41JCT and Echo-Cancelled data routing
- D/41JCT Experiment Help
- D/41JCT-LS - CallerID in DTMF support?
- D/41JCT-LS and Panasonic 8EXT
- D/41JCT-LS Configuration Parameter for Saudi
- D/41JCT-LS Setup
- D/41JCT-LS setup with Windows 2003
- D/41JCT-LS Windows driver installation?
- D/41PCIU and SR 5?
- D/42 Openserver 5.x
- D/42-NS
- D/42-NS 4 connected to Nortel Norstar PBX
- D/42-NS compatible software
- D/42JCT question
- D/42JCT-U Download Firmware error
- D/42JCT-U with SL-100
- D/42JCT-U: SetHook unable to transition HookState
- d/480jct 2t1 No green lights
- D/480JCT-2T1 + GCSR5.1FP1: Bargein, CallTransfer
- D/480JCT-2T1 - Hangup detection during call
- D/480JCT-2T1 nad D/240PCI-T1 help
- D/480JCT2T1 and FXS LS
- D/4PCI
- D/4PCI - Windows 2003 Server - TAPI licenses
- d/4pci and windowserver2003
- D/4PCI bridging together channels
- d/4pci card works and then stops answering calls
- D/4PCI Driver
- D/4PCI errors.
- D/4PCI full duplex
- D/4PCI howto: how to transfor an incoming call
- D/4PCI in a Windows XP Home machine
- D/4PCI line 4 problem
- D/4PCI O/S
- D/4PCI TTS
- D/4PCI vs Dialog/4 vs D/41DHS
- d/4pci winxp
- D/4PCI with speech
- D/4PCI, NEC Electra Pro, PBXpert
- D/4PCI-UF
- D/4PCIU - DCM does not detect the device
- D/4PCIU - DCM Error on Clock Source Configuration
- D/4PCIU and CSP
- D/4PCIU board and 'Parameter File
- D/4PCIU calls via TAPI 3
- D/4PCIU Driver where/how to install ??
- D/4PCIU Install Problem
- D/4PCIU really works on a 3.3V PCI slot ?
- D/4PCIU software needs
- d/4pciu WAVE Driver
- D/4PCIU4S
- D/600 2E1
- D/600JCT-2E1 is playing audio on first 30 channels
- D/600JCT-2E1 loopback RED on one span
- D/600JCT-PCI recognize as a D300JCT-PCI dont start
- D/600SC-2E1 - Nortel switch PRI ESTI protocol
- d/600SC-2E1 clocking errors
- D/600SC-2E1 compatibility wtih CAS signal
- D/82 Cables
- D/82-JCT and d42_gtcallid
- D/82jct very poor quality sound
- D/82U recording Wave using SR5.1.1
- D120jct-ls and Win2000 5.1.1 SP1 &FP - not working
- d120jct-ls/u
- D120JCTLS in PBX Expert hang up tone
- D120JCTLSU
- D240JCT-T1 and dx_getdig
- D240JCT-T1 and Siemens ROLM
- d240jct-t1 configuration. need help!
- D240JCT-T1 Drivers
- D240JCTT1, no inbound calls
- D240SC-T1
- D300 PCI E1 Card Support on RedHat 9.1
- D300 volume
- D300/SC
- D300JCTE175, D300JCTE175U, D300JCTE175R2U Are = ?
- d300pci E1 75 ohm
- D300PCI gc_OpenEx() Null pointer error
- D300PCI in Peru
- d300pci on linux 7.2 with feature pack 1
- d4/pci and windowserver2003
- D4/PCI question
- D4/PCI voice board, is not detected
- D4/PCIU
- D4/PCIU on Win 2000
- D41-D Dialogic Card
- D41/D Card Bad Hardware ID in registry
- d41epci
- D41EPCI CTMedia
- D41ESC Installation problems
- d41esc-an win2000
- D41H Incompatibilty driver with Windows 2000
- D41JCTLS SR6.0, WIN bidirectional streaming
- d42_chnstatus vs ATDX_HOOKST
- D42JCT - not detecting Rolm external ring
- D42JCTU: 8434 lines. incorrect display
- D480 JCTs do NOT work in Compaq DL380 servers
- D480JCT-2T1 and UDD
- D480JCT-2T1 connected to PBX?
- D4PCI -- What inf file and driver to use
- D4PCI and D4PCIu Cards
- D4PCI dropped line problems
- d4pci on win2000 udd test help
- d4PCI won't start
- D4PCI, XPPro and MS Telephony
- D4PCIU - XPPro vs Win2000
- D4PCIU crash
- D4PCIuand SR5.1
- D82 boards in HP server
- D82JCTU
- D\v 1200 using only even number of cic
- Dailogic C# API's
- DASS2 D-channel trace corrupt
- Database Connections..
- DBV600BTEP Installation
- DCM Cannot Auto Start
- Decoding CCEV_STATUS message data
- Delays between wav files & anti-talkoff problems
- Dell PE2600 and D 120 analog card
- Detect connected signal
- Detect DTMF and yet need continue play wave
- detect the 'Follow-Me' number
- Detecting a Channel Down
- Detecting BargeIn using CTADE
- Detecting call state on outbound calls
- Detecting Certain Answering Machine Messages
- Detecting Disconnect tone & Caller IDs
- detecting dtmf tones and digits
- Detecting GCEV_DISCONNECTED on outbound calls
- Detecting Hang-up during Call Transfer
- Detecting Incoming Distinctive Ring, Double Ring
- Detecting Loop Current drop in D/41 JCT-LS
- detecting number of ring count before disconnect s
- Detecting termination digit
- Detecting the jacket number on ISDN
- Detecting the user hook on
- Determine that parallel phone answer the call?
- Device Busy when dx_playiottdata& dx_getdig
- DI/0408-LS-A
- DI/SIxx voice resources
- Dial Strings for Norstar using d/82
- dial tone detection
- dialgoic loopback
- dialing
- Dialing number but getting busy (in perfect call.)
- Dialing to an Office with Extensions
- Dialling with D\41E dialogic board Ver 5.1
- Dialog/4
- DIALOG/4 cann't work at WIN2K SP4
- Dialog/4 hardware install
- DIALOG/4 ISA and Asterisk
- Dialog/4 Linux Drivers
- Dialog/4 TAPI wave recording issues
- dialog/4 wave recording problems.
- Dialogic
- Dialogic + Fedora
- Dialogic - Call transfer failure.
- dialogic - isdn - meridian call transfer
- Dialogic 240 PCI/T1 card stopped working
- Dialogic 5.1.1.with SP1 & FP1 work with 2003?
- Dialogic And Long Distance Numbers
- Dialogic and Red Hat 7
- dialogic antares
- dialogic API and play wav
- Dialogic as TIE on a pbx
- Dialogic Board Not reconized
- dialogic board on RedHat 9 or Fedora
- Dialogic Board Revision History
- Dialogic board version
- Dialogic boards interfering with system time
- Dialogic card detected but not working..
- Dialogic card on linux
- Dialogic cards
- Dialogic cards - soft & hardware advice
- Dialogic Configuration Manager ( DCM )
- dialogic cpi400b fax card
- Dialogic D-4PCI Voice Board
- Dialogic D/120JCT-LS
- Dialogic D/300SC E1 - AVAYA Definity - ISDN issue
- Dialogic D/41H Issue - Getting PC Interrupt Fails
- Dialogic D/4PCI and Compaq computer
- Dialogic D/4PCI Driver
- Dialogic D/4PCI Interrupt Failure
- Dialogic D41D
- Dialogic D4PCIU Commands & auto hangup
- Dialogic D4PCIU Commands & Not auto hangup
- Dialogic DM/V 480A Drivers
- Dialogic Driver Crashs
- Dialogic drivers fail to start
- Dialogic Error 270 (0x10E): Bad call ID
- Dialogic FAX
- Dialogic for European language countries
- Dialogic hardware and software training
- Dialogic not getting phone system intergration dig
- Dialogic not reponsding
- Dialogic P4 windowsXP
- Dialogic Pascal library files
- DIALOGIC PCI CARD
- Dialogic PCI-X adapters
- Dialogic problem
- Dialogic projects/programmers?
- Dialogic ProLine/2V Callet ID Issue
- Dialogic service fails to start automatically
- Dialogic support - how to get it?
- dialogic support for RH linux
- Dialogic System Service
- Dialogic TSP (TAPI) and full-duplex call
- Dialogic TSP and Wave drivers and D/4PCI
- Dialogic Version 6.0 Logs --URGENT
- dialogic version 6.0--dx_playiottdata PROBLEM
- Dialogic Voice Brick
- Dialogic VOIP board for Televantage
- Dialogic:Sending faxes to the wrong locations
- dialtone detection
- dialtone detection without call
- Dianatel/ Dialogic repair
- Diff between Q.931 and Q.931.e? Is there any?
- Difference between CPi/400B and CPi/400B2
- Difference between D/41JCT-LS and VFX/41JCT-LS ?
- Difference of D/120-JCT-LSU and D/120-JCT-LSEUROU
- Differences between MSI and DISI
- Digit acquisition
- Digit Detection and determination
- Digita phones to BRI80
- DirectX quiet on Dialogic D4PCI
- Disable MSI conferencing resources
- Disable Network Lookback DM/V960A-4T1-PCI
- Disconnect in analog board after call transfer
- Disconnect supervision tone spec for India
- disconnect tone
- Disconnect Tone Detection - sr_enbhdlr() error
- Disconnect tone problem about DI0408LSA
- Disconnection and Blocked Channels on D/600JCT-2E1
- Disconnection problems with outbound calls on DM3
- DISI 32 tuning
- DISI boards on Linux
- DISI24 and dx_getdig()
- Dispute.
- Distinctive ring & analog loop cards
- Distributing SR5 with my application
- DLGCSRAM.SYS causing bluescreens
- dlopen failure in cheetah_start on Linux
- DM / ECR - ATDX_BUFDIGS
- DM IPLink with Cisco
- DM/F240 does not always pick up
- DM/F240-1T1-PCI and GDK
- DM/F240-1T1-PCIU errors w/ CTADE configure profile
- DM/IP301-1E1 dlstart error.
- DM/IP601 2E1 setup help needed
- DM/IP601-2E1 and CISCO IP PHONE 7912
- DM/IP601-2E1 general ino help needed
- DM/T1200 board in the HMP 1.3
- DM/V-A Central Processor Failure
- dm/v1200 e1
- DM/V1200 Not connecting
- DM/V1200-4E1-CPci turn on Carrier Signal led
- DM/V1200A-4E1-Televoting
- DM/V1200BTEP
- DM/V480A-2T1 and Genload
- DM/V480A-2T1-PCI Dialogic service not starting
- DM/V960 4T1 PCI using pdk_us_ls_fxs_io; no inbound
- DM/V960-4T1 vs. D/480JCT-2T1
- DM3 and GammaLink detection
- DM3 B Channels .. resets
- DM3 DualSpan testing problem
- DM3 Fax Transmit Level Too High
- DM3 IPLink resources usage
- DM3 ISDN Configuration non-NFAS
- DM3 on ISDN E1
- DM3 PDKTrace
- DM3 Problems setting Tones as DTMF
- DM3+gc_GetSigInfo
- DMC 5.1.1 FP1
- DMIP2411T1P100 and gateway_r4 demo
- DMN160TEC Synchronization
- DMV 160 LP HIZ Problems
- DMV 960A cPCI - E&M WInk/CAS/D4/AMI
- DMV960A_4T1 and Intel Call Manager TIM
- DNIS capture problem with IBM software
- Do I have to reset 'clear coding value' each time?
- Do I need a cable between 2 d/240sc-t1 boards?
- Docs for GlobalCall custom call control libraries?
- document KB 2359 Bad sentinel
- DOES CT ADE support HMP 1.1
- Does D600JCT-2E1-120 support CSP ?
- Does Dialogic Support CDMA Analog Line?
- Does TextTalk still exist?
- DON'T DELETE THIS MESSAGE -- FOLDER INTERNAL DATA
- Don't hear ring backs
- DOS Dialer Batch File
- Download appears corrupt
- Downloading CDP file on springware board
- Downloading Drivers
- dpnss documentation
- dpnss license
- Driver for the Dialogic V-22 Pro?
- Driver Information Needed
- Driver Support for GCC version 3.x
- Drivers
- Drivers for D/4PCIUF
- Drivers/Software for D/4PCI
- Dropping loop current or reverse current on MSI
- DSE Monitoring Tool
- DSLT Board serial ID?
- dt_listen and dt_unlisten sometimes cant to work
- dt_listen versus gc_Listen
- DTEV_T1ERR events.....
- DTI/211 CP12 'E&M Wink' or 'Loop' start?
- DTI/240SC Configuration
- DTI/301SC connection
- DTI/481SC Installation Help
- dti301 sc 120 ohm configuration
- DTMF Events Stop Firing After dx_rec
- Dtmf recognition
- DTMF String limit
- DTMF Tone
- DTMF tone parameters
- Dual ss7 link.
- Dutch Language Support
- DV_TPT DX_LCOFF condition for DSLT?
- dvbmwput() MC_MOREDATA error
- DX_CAP structure
- dx_chgdur() deviation
- dx_dial and PVD
- dx_dial call blocking
- dx_dial gives firmware error
- DX_DIAL HELP !!!
- dx_dial not dialing returns 256 value
- dx_fileopen
- dx_getdig() on a digital board
- dx_mreciottdata - problem recording - Pl.Help.
- dx_open fails, errno=2
- dx_play problem
- dx_playiottdata problems
- dx_rec and dx_play on the same channel
- dx_reciottdata fails
- dx_sethook progressive time delays
- dx_setqualtmplate()/dx_getqualtmplate()
- dx_stopch takes too long to complete
- dx_wtring not waiting
- E1 Euro ISDN with Rockwell - DCH error
- E1R2 Answer Supervision - ICAPI
- Earth Recall
- ec parameters on digital - do they work?
- Echo cancellation
- Echo Cancellation in CTADE
- Echo cancellation with CSP on DM3
- Echo problem on aboutment
- Echo with DCB boards / PTR 29542
- ECHO WITH DISI32R2 (FR)
- Emergency! Application crashes every few hours
- enable CSP on dialogic board
- Enable fax on D300/JCT
- EnableDigitDetected = true
- Enabling CSP in Dialogic D/300JCT-E1120
- Enabling Fax at D/600JCT2E1
- End of DTMF tone
- Envox
- Ericsson and QSIG
- Erratic call progress analysis
- error 264, D/240Sc T-1
- error connecting two trunk resources using CT ADE
- Error detecting board DM/V1200
- Error in establishing conference in msi
- Error installing Dialogic D41E PCI and D41JCT LS
- Error matching grammars in version 8.3
- Error on D/82 Voice Card
- Error on Detecting D/240
- Error on detecting device
- Error on dx_listen
- Error Starting Diagnostics
- Error starting dialogic
- Error starting Dialogic Service
- Error starting Proline/2V
- Error using GC_CallACK
- Error using Matchbocx with SAPI
- Errors during outbouòâ calls
- errror 16383 when install two d41epci on winNt4
- ESF with D/480SC-2T1
- Euro ISDN & D/6000SC-2E1
- Evaluation Version Database Limitations?
- Event 0x204d
- Event Handler ??
- Event handling
- Exceptions
- Exchanging of non voice data using D4/PCI
- extracting OCN using gcapi
- Extracting Redirection Information from call
- Failed to detect board
- failed to install NetMerge 1.0 in SystemRelease6
- Failing to call dx_initcallp() function...
- Failing to start MSI/PCI-Global
- false event of DE_LCOFF in d/41jct
- False PAMD on DMV
- Fast Busy Detection.
- Fast Forward/Rewind
- Fax boards CT ADE
- Fax in D/120JCT-LS
- Fax Problems with D42JCTU card
- Fax Receiving Errors
- Fax Send Error but Fax Sent
- Fax sending multiple copies.
- Fax Tone Genertion
- Fax Tone Problem
- Fax with BRI/2VFD not working?
- faxbocx.abort failure
- FileSize=0 when recording under 0.5 sec
- Filtering Noise
- Firmware files (.fcd/.pcd) for VF240-1T1
- Firmware version
- First second not heard when playing wav file
- fixed: NI2 PRI won't make a call on DMS100 isdiag
- Flash Hook on T1 Line
- Flushing the Dialogic event queue
- Format and Serial Number
- forum problems
- Forward, rewind pause while playing vox f
- FP1 SU56
- Frame sync loss or slip ?
- free a line after WaitCall?
- Frequent disconnected calls D/480/SC-2T1
- From wr to get key code to Enable Fax card on JCT
- FSK caller id detect problem from consecutive ring
- Full Duplex in D/41EPCI
- fx_close() hung when 'Remote has disconnected
- fx_stopch() cause application hangs
- G.722 Codec on E1/T1 DMV card
- GammaFax
- GammaFax CP4/LSI under W2K?
- GammaFax on SCO Unixware
- Gammalink (GDK) & SR6.0 PCI
- Gammalink 1994, GammaFax Dispatcher 5.3.5p
- GammaLink And CPI/2400JCT
- Gammalink CP12/SC Series 2
- GammaLink error code 3235
- Gammalink gfxfaxcontrol 40
- GateKeeper & GlobalCall
- GC basic call demo call states
- GC Outbound code for T1
- gc_ or dx_ pros and cons
- gc_Close Takes a Long Time to Complete
- gc_makecall always fails in global protocols 4.3
- gc_makecall help
- gc_makecall not actually calling
- gc_makecall() in sync mode simultaneously
- gc_MakeCall, weird behaviour
- gc_Open - 'Change transmit type failed
- gc_Open Ex: Internal Global Call Error
- gc_OpenEx - invalid device name
- gc_OpenEx : Null pointer error
- gc_OpenEx error: Null pointer error
- gc_OpenEx fails on D/600JCT ISDN ctr4
- gc_OpenEx hangs after having worked at least once
- gc_OpenEx question
- gc_OpenEx() failing under HMP 1.1 FP1
- gc_ReleaseCallEx
- gc_Start compatibility library
- gc_Start returning 'segmentation fault' in Linux
- gc_Start() Issue
- gc_startTrace
- GCCT_PVD in PDKRT (Outbound)
- GCEV_FATALERROR Event
- GCEV_MEDIADETECTED event is not generated at times
- GCRV_SIGNALLING - Global Call result value
- GCT_receive
- Gctlib.lib
- Gen2 TSP in Service Release 6
- General CSP question
- General Design Question. Callback event handlers.
- General Dialogic Discussion
- General PCI compatibility statement
- Get caller IP ?
- Get Current Span Alarms
- Get digit on DMV6002E1
- Get DNIS with D/120JCT-LS
- Getting Board Device Handle
- Getting callerid in PRI
- Getting Digits in a Conference in CT ADE/
- Getting Digits in DCB Conference
- Getting DTMF DIgits in Conference Using CT ADE
- Getting events of Perfect Call Analysis..
- Getting Fast Busy after a while of running fine
- Getting Network Device
- Getting No ringBack when doing flash Hook
- Getting Started With Dialogic
- Glaobal Call API Help
- Global Call Api , ISDN and other protocols
- GLobal CALL API help needed
- Global Call basics - need help
- Global Call CDP file for France Analog
- Global Call libraries missing
- global call on CT media 1.2
- Global Call Protocols package 4.x
- GlobalCall ANAPI + D/41H
- GlobalCall events
- GlobalCall MEDIADETECTED call info values
- GlobalCall Pros/Cons
- GlobalCall Protocols 4.2
- GlobalCall SS7 and DataKinetics SIU setup problems
- GlobalCall Threaded Voice Response Servers
- GlobalCall+SS7+REDIRECTION_NUMBER
- GlobalCall: dx_playf results in no audio
- gnugk & DM/IP301-E1-100BT
- GOD NO!
- Group 4 support by Intel Dialogic boards.
- GSM to Dialogic PCM convert
- H.323 call transfer
- H.323 supported by Dialogic
- Hack Into PC From Dialogic Board?
- handle both incoming and outgoing in same line
- Hang up problem in Conference Solution
- hanging up more than it should
- Hangup detection
- Hangup Exception while dialed party is busy
- Hangup parameters for Canada ?
- Hardware key
- Hardware Monitoring of D/480 JCT 2T1 on Linux
- hardware requirement for IVR setup
- Harware compatibility
- Has anyone used GCMSK_DIALING on DM3?
- have d/41 card need toolkit/firmware/drivers???
- Have tp use Dialogic D4PCIU to send short message
- having trouble dialing out using dx_dial
- HDSI Volume Level
- HDSI/1200 voice resources
- heart beat signal from dialogic
- HELP .. frustatus ???
- Help Dialogic API
- Help for dialogic voice and fax board...
- help joining D/300 & DM/V600
- Help need with DM3 ml10_dsa_cas media load
- Help needed to select dialogic board for conferenc
- HELP Netmerge Callmanger Instalation problerm
- Help required for handling ICAPI error
- Help to problem with d/4pci
- help wiht maxdtmf
- HELP WITH DIALING
- Help with DM/V960a-PCI
- help with DM3 and redhat
- Help with dx_dial() in analog boards
- help with dx_open
- help with scbus routing for BRI/80SC ISA
- HELP! dx_setuio and dx_rec
- Help!! Demo utilities for Springware board
- Help!!! I've spent all 24 hours straight on figuri
- Help!: First Prompt clipping & clipping after DTMF
- help: IAI can not be received by user application
- Hiss in recording D4PCIUF
- History of Dialogic API
- Hiz technology
- HMP - What protocols does it support?
- HMP and CT ADE?
- Hookflash Time
- Host-based stack
- Host-controlled release causes Time slot Taskfail
- How can I do?
- How can I get DNIS?
- How can I get the event?
- how can I use two D4/PCI
- How can one conect a Call using loop current detec
- How Detect Incoming Call at Digital Board (D300)
- How do I Connect d/480JCT to ISDN PRI
- How do I detect the DX_OFFHook event ?
- how do i write a wrapper
- How Do You Detect the Caller Has Hung Up
- How find out type of voice resource in Linux?
- how integrate dialogic D/300JCT with PBX Nortel 81
- how integrate intel dialogic D/300JCT with
- How to - Global Call gc_test.exe to work
- How to busy out a channel using Global Call?
- How to change Framing and Line conding for D/240JC
- How to clamp tone?
- How to complete call analysis under D/480JCT-2T1
- How to configure CPM8 card and DMV1200-4 E1 card?
- HOW TO CONFIGURE DIALOGIC FOR MERIDIAN LINESIDE E1
- how to configure the pdk_us_fxs_ls_io.cdp on ctade
- How to configure to support FGD & Clear Channel
- How to connect station to call
- how to count the total number of ports
- How to detect software disabled phone on D/82
- How to detect when End User cut the line
- How to determine D/480 JCT revision level?
- How to determine is DMV1200A-4E1 works?
- How to disable caller id while using ms_genring()
- How to enable the GFXMAXRATE parameter in CT ADE ?
- How to force dialogic to raise incoming .....
- How to Force SimPhone to Run
- How to get CallerId while using Nuance?
- How to get physical board name from logical one?
- How to handle DX_CAP param for dx_dial
- How to identify a HIZ board programmatically?
- How to implement voice over ip?
- How to make a virtual phone
- How to open DlgcS7.log ?
- How to pack SCP_MSG_TX_REQ message?
- How to quickly redial?
- How to release call after TBCT
- How to route 2 channel ...
- How to send fax of MS/doc ,MS/xls, with VFX/40E?
- How to Set Language with VB
- How to set offset in playing files
- How to set the max numb of rings before no answer
- How to start MGCP, H.248 stack
- How to start MGCP, H248 stack
- how to start with SS7 ?
- How to talk to SIU ?
- How to tell if the Dialogic service has started?
- How to transfr a call to EPABXfrom IVR using CTADE
- How to use DI/SI32 to implement transfer calls?
- How to use ms_setbrdparm()
- HowTo record wav (with 'riff') to memory
- Howto set ISDN Info Element on DM3
- http://www.mediateldata.com/srgui.html
- i can't insert date to mysql
- i do not receive any events
- I need some tips about conference with DCB board
- I need to add conference in DM/V 1200 A
- Immediate DISCONNECT after gc_MakeCall on DM3
- Improper detection of an answering machine
- In need of a telecom expert/contractor
- Inbound calls blocked after network disconnect
- Incoming call
- Incomming and outgoing call using same channel
- Inconsistent Outbound Calls with D/41JCT-LS
- incorrect no. of voice boards on D/300JCT
- incorrectly transmitted CALLING Type of Number
- indexed vox files
- Inexpensive TTS
- Info on CTADE4RT Dialogic Dongle
- Initializing Layer 2 on DM3
- Inserting record in database via ADL Flowcharter
- install D/41JCT-LS under RedHat 8.0
- Install D41/JCT-LS under Redhat 73.
- Installation and drivers
- Installation of multiple dialogic cards
- Installing 2 D41/EPCI boards in W2K
- Installing a DM/V960A-4T1
- Installing DM/IP041-LSI on Win2K
- Installing DSLT Board!!
- Installing Linux for springware boards
- Installing Multiple D/240JCT-T1 Boards
- Integrating Audio Stream into solution D240SC-T1
- Integration with Siemens HiPath 4000
- Intel CCP2100
- Intel CTADE for HMP
- Intel dialogic D/41 JCT-LS with Net merge call ma
- Intel Dialogic D/4PCIU board in a Windows 2000 Ser
- Intel Dialogic Gammalink Cpi/200 PCI on Win2k ??
- Intel DM/V600A-2E1 error
- Intel NetMerge Call Manager
- Intel NetMerge CallManager 1.1 availability?
- Intel® Dialogic® D/240JCT-T1
- Intel® Dialogic® D/240JCT-T1, D/300JCT-E1, D/480JC
- Inter-Tel PBX and FlashHook
- Interface ID Present bit set in PRI. Disable?
- Internal error: CTrunkDev::UnfreezeMedia()
- Invalid Switching Handler Bus Mode
- IP DTMF with RFC2833
- IPLink board refuses to start
- IPLink cannot hear ring back tone when accepting c
- IPVS don't work on IPLINK2431A with ISDN
- IRQ Conflict
- IRQ Setting
- Is D120JCT-LS a TAPI compliant product??
- Is it poss to add voice,DTMF to Dm/F300-1e1
- Is it possible to dx_getdig more than 31 chars
- Is Linux + Dialogic DEAD ??
- Is list of PBXs supported by the D/82 and SR 5.1.1
- Is System 6.0 better?
- Is Text to speech possible
- Is the CT Cable needed if not sharing resources?
- Is This Forum Still Used by Intel?
- Isdiag error
- ISDIAG: Tutorial and sample traces
- ISDN - Caller cannot hear prompt play
- ISDN back to back
- ISDN busy dialed number
- ISDN Cause No 102. How can i kill this problem?
- ISDN Channel Out of Service
- ISDN diagnostic
- ISDN play fails, record works
- ISDN PRI 5ESS with Nortel DMS250 PBX
- ISDN PRI protocol for E1 card
- ISDN pri with PBX
- ISDN PRI with PBX integration
- ISDN PROGRESS MESSAGE TYPE ON DM3
- ISDN protocol (BRI/SC & DTI/301SC)
- ISDN start/end call interaction w/ voice channel
- ISDN Testing
- ISDN/QSIG SS Signaling Documentation
- ISDNTRACE.EXE Not Behaving
- ISUP msg processing and GlobalCall
- ISUP_CONFIG problem
- It needs a reboot to restart the board VFX41jct
- ITU & ANSI SPCI4 cards in same host
- IVR Lines get blocked over time (E1 - R2 CAS - CTA
- IVRS application on Dialogic DTI/SC series
- IXA2400 Simulator Version 3.51
- Late Connect with Dialogic
- LATE GCEV_DISCONNECTED event
- line arbitration
- Line T1 Global Call failing to create CALL_OFFERED
- Line Tapping with D/4PCI
- Linux 7.2 Dialogic 5.1 SP1 Channel Errors D41D
- Linux Dialogic Drivers. kernel 2.4.20
- Linux PCI Sanity check please!
- Linux PCI Snaity check please!
- Linux sctsassign fails after adding 8th board
- Linux SR5.1SP1 - wont work with a D/4PCIUeuro card
- Linux versions
- Looking for Dialogic Consultant in Atlanta, GA
- Looking for Dialogic Developers
- Looking for Tapi board.
- Loop drop detection in D/4 pci
- Loopback of DM/IP link spans
- Loss of clock on DM/V600-2E1
- Loss of D Channell DIalogic D/240JCT Siemens HICOM
- lost CT connect dongle
- Major Bug/Problem in SR 6.0
- Making a conference call.
- max cable length for DSE boards
- McAffe Virus Scan and tlephony server
- Memory leak in adorll.dll
- Memory usage in CT-ADE
- Meridian help - route calls from D/240PRI to PSTN?
- Message too big or too small
- Messaging
- Method RecordFile with adx (CTADE)
- Microsoft SASDK Beta 4 and Dialogic
- migration from NMS to Dialogic
- missing DTMF digit whith tone dial
- Missing DTMF tones
- Missing events when using sr_waitevt()
- Missing ISDN signals
- MITEL SX200 TSF FILE
- Mitel sx2000 IVR integration question
- Mixed Analog/Digital in Linux?
- Modems on MSI Station
- mon_conf from TN302 also fails under Linux
- Monitor T1 Circuit
- Monitoring Robbed Bit states on DM3
- monitoring software?
- more noise in bridging the call from JCT to DM3
- ms_estconf() problems
- ms_getcnflist segmentation violation
- MS_SETEVTMSK nOT WORKING
- MSI 240 GBL help needed
- MSI 240SC change
- MSI conference & DTMF detection
- MSI-C installation under SR 5.11?
- MSI: Message too big or too small
- MTP_SLT_FAIL
- Multi-Processors
- Multiple CCEV_SETCHANSTATE Events
- multiple D/240JCT-T1 cards
- Multiple gc_SetInfoElem()
- Multiple User Profiles
- Music on hold
- MVIP with H100
- NEC Wiring with D/82JCT
- Need a start with Dialogic Card
- NEED AN ORDER OF EVENTS
- Need Dialing Application
- Need help about Dialogic API
- Need help with D/82 cabling
- Need help with NoConnect using voicebocx
- Need suggestion for outbound call handling
- need to get DNIS for outbound calls!!
- need toolkit/firmware/drivers?????
- NetCrv in ADL with BRI/2VFD
- NetMerge License USB verses PP
- Network Message Service over NI-1 on DM3
- new Linux release
- New System Release Plans
- New to GlobalCall
- New toolkit for VB, FoxPro
- New version
- New Zealand ISDN
- Newbie
- Newbie disconnect detection help
- Newbie question
- NFAS Help!!
- NFAS on D480JCT-2T1 board
- NFAS Problem on DMV960-4T1
- NI2 PRI won't make a call on DMS100
- NO CCEV_CALLINFO or CCEV_NOFACILITYBUF event on ISDN PRI protocol NI2...
- no circuit/channel available
- No Dialogic Technican here?
- No drop call event on ISDN PRI D300 JCT E1
- No GCEV_UNBLOCKED after gc_OpenEx when using pdk
- No Hang Up
- No MSMM_HOOKFLASH event before MSMM_ONHOOK event
- No NEC on D/82 befoire 2004Q3
- No RingBack on Inbound and no GCEV_ALERTING on out
- No term evt sometimes?
- No timeslots assigned
- No Topic
- No valid response. Anyone seen this problem?
- No voice (usually) in SS7 with Global Call
- NOBODY THERE TO HELP ME!!
- noise in nr_scroute
- non-transparent PCI bridges
- Nortel Line Side E1 with D300PCI-E1
- northern telecom norstar meridian/pbxpert .tsf fil
- Not able to use dx_sethook after issuing dx_stopch
- Not detecting older ISA board in DCM w/ new SBC
- Not detecting second Libra card
- Not detecting silence
- Not detecting SPCI4 on DCM
- not FAX resource: SCBus connect DM/V1200-4E1&VFX
- Not Seeing DropCall Response in ISDN Linux
- nr_scroute() error
- Nuance DEMO
- Nuance v8.0.0 with CTADE
- NVP3.0 support for Dialogic Analog baords
- Odd pulsing noise using CT ADE v8.3
- OKI ADPCM CODEC
- old D/120jct-ls lock up
- OLD VTG Voicebridge PC ISA Docs
- only 3 of 4 channel in D4/PCI can get CallerID ?
- Open channel on D/120JCT-LS
- Opening conference resource in DM3 boards
- OpenSpeech on single span board
- Operator 's Help
- Operator intercept
- Out Of Frame Errors on D/240JCT-T1 but not on SC
- Out-bound dialing on CAS T1
- Outbound call fails to connect in a synchronous mo
- Outbound calls OK, Inbound not
- Outgoing Call Answer Detection
- output channel audio to the audio board
- Overlap receiving problem
- overlap sending case-A dialtone
- Overlap support for BRI/SC in SR5.1 Global Call
- packet mode connection
- Param 0x24, Host control ISDN Release
- partity software licences
- Passing T-1 signaling between two channels
- PBX emulation for testing?
- PBX Intg. Users Guide: Rolm clarification
- PBX Line connected to D/4PCIU - no ring tone !!!
- PCCS6 System. MTP Link activation problem.
- PCD file for DMIP2431A
- pci card
- PCI detection comes up after every reboot
- PCI Dialogic Cards are compatible with PCI-X
- PCI Express telecom boards & .Net class library
- PCI-X bus compatibility
- PCIx alternative for 4-port analogue boards?
- PDK Remote Disconnect Ignored
- pdk_na_an_io.cdp file
- PDK_uf_mf_io Correct Config
- pdk_us_mf_io gc_MakeCall / gc_BlindTransfer
- PENTIUM 4 AND UP
- Per Issue Dialogic Support
- PerfectCall and Disconnect Supervision
- Phone enabling databases using Global Call
- PIMG80PBXDNI Unable to maintian carrier with NEC
- play sound file refenence by database
- Playing and recording files on ISDN PRI D300 JCT
- playing mp3 file
- Playing numbers, date
- playing u-Law 11kHz files on D/4PCI -voice quality
- Playing wav files in DM3
- Playing wave files in a loop
- playing wave files in DM3 boards
- Please help! Download CDP file on springware board
- please me with dx_dial
- Porting from Embeded stack to Host - based stack
- Porting from ISA bus to PCI bus?
- Preventing transition to Phase E in fx_sendfax
- PRI configuration problem
- Probelm with D JCT 300 to use ISDN numeris
- Proble Detecting Caller ID in D/4PCI Dialogic Card
- Problem after Installation of D\120JCT-LS
- Problem Collecting Digits on 5% of calls...
- Problem config CPI400BRI + D/300JCT-E1 on Win2003
- Problem configuring TSP on E-1 card
- Problem detecting 240JCT
- Problem detecting DM/V960 on Linux
- Problem in Dx_getdigit
- Problem in Inbound Calls
- Problem in installing Intel Dialogic PCI Board
- problem in installing linux release 5.1
- PROBLEM IN INTRUSION -URGENT
- Problem linking nr_scroute and nr_scunroute
- Problem of E1 & T1 interface board in one IPC
- problem opening SS7 devices on D/300 JCT E1 board
- Problem or Dialogic's Bug???????
- Problem Recognizing Ring Tone
- Problem setting up DM3 with pdk_us_mf_io
- Problem Starting MultiThreaded CTA DE Application
- Problem using dx_playtone
- Problem with CR_NORB
- Problem with D/240JCT-T1 in an HP Machine
- Problem with D3000 PCI , Antares and Win NT 4.0
- problem with DX_DIAL
- Problem with dx_getdig()
- problem with fx_open() function
- Problem with getting TM_DIGIT while recording
- Problem with ms_genring
- Problem with MSI/240SC Global
- Problem with multiple D/480JCT-2T1 cards
- Problem with one D/82 port
- problem with out of service line
- Problem with receiving and transmitting faxes
- problem with some outgoing call´s
- Problem with Universal Diagnostic Tool
- Problem with Voice file not heard... ISDN NI2
- Problems cancelling gc_MakeCall()
- Problems dx_getqualtmplate
- Problems in DSP Fax Transmission
- Problems recognising card in HP Proliant DL380
- Problems starting IPTMail demo
- Problems with BRI/80PCI
- problems with D4PCIUF features (pulse detection, .
- Problems with Dialogic SR511 Setup
- Problems with DM/V600A-2E1-PCI, Topaz and Media
- Problems with DM3 and Transfers
- Problems with DTMF tones
- problems with global call api
- Problems with Proline 2v
- Problems with R2 MFC in Slovakia
- Problems with the mx_r2_io.cdp file
- Problems: 2 E1s from 2 sources on DM/V600A-2E1
- PROGRAMMER WANTED WITH QUICK FIX
- Programming Dialogic D/41JCT-LS. Help me please.
- Programming Dialogic in Visual C ?
- Programming Dialogic in Visual C++?
- programming problem
- Proline 2/v & MS Web Telephony Engine problem
- Proline 2V disconnects mid-call
- ProLine 2v line1 off hook
- Proline 2v software
- Proline/2v Installation
- Prompts can´t hear after answer a call
- proper call analysis
- Pthreads with SR 5.1 SP1 on RedHat 7.3?
- PTR #33443, does it apply to ec_stopch?
- PTR 29095: DCB echo on 5.1.1 SP 1
- Pulse-to-tone
- Pvd and pamd detection in incoming call detection
- Q: gc_AccepCall Returns EGC_INVSTATE
- Q: Pager Recognition Using Frequency Detection
- QSIG for D/300
- QSIG-PR support under D300-E1
- Question about Hangup !!
- Question on GammaFax 5.3.6.I Firmware
- questions about D/240SC-T1 card
- R2 E1 D/300SC-E1 Problem setting cdp
- random Access Violation when send fax
- random mute on DCB
- Range and Status message
- Real-Time Audio Streaming & User I/O Functions
- reboot D/120JCT
- receive fax timeout
- receiving FSK data during offhook
- Receiving Q931 STATUS message notification on DM3
- Record error TDX_ERROR SR5.1.1
- RecordFile MaxSeconds
- recording a conference
- recording conversation dx_recm
- recording conversation fo call
- recording conversation of call
- Recording Error
- recording files
- Recording in WAVE format on DMV480A
- Recording quality, echo issues
- recording the conversation of a call
- recording wav formats in dialogic
- Red and Green T1 lights on D/240JCT
- Red Hat Advanced Server
- Red Hat Linux Enterprise
- RedHat 7.3 &SP_51
- Redirect phone call to operator?
- Reference Books
- Reliabiliity Data
- reply
- Replying to test on 10/30/03 from email
- Replying to test topic #2 10/30/03
- requested circuit/channel not available
- RES: D/4PCI full duplex
- RES: Looking for Tapi board.
- Retrieve fax message
- Retrieve ISDN PRI information elements by CT ADE
- Rev 2 of the Dual Span JCT Series (D480 JCT)
- Rewind, Forward, Pause
- RFQ: Live Dialogic Developer Site?
- RH 7.3 SR 5.1.1 DM/F240-T1-PCI Help
- Right forum for VTG?
- Robbed-Bits
- Rolm 9005 mwi
- Route Optimization or Explicit Call Transfer
- Routing on JCT board
- Routing phone call?
- Routing Two Channels Together Poor Audio Quality
- Routing when CSP is enabled with D/120JCT-LS
- Running CTADE as a Windows service
- Running VOS as a 2000 service
- Sample Code Please?
- Sampling Rate Recognition
- SAPI, TAPI, Dialogic Wave Driver problem
- Saving\Retrieving WAV file into/from DB in VC++6
- scaling question
- SCBus DM3 + JCT12 how?
- scbus low volume
- SCCP module config
- scmkcfg.exe
- Seg fault when we issue Gc_waitcall with time out
- Segmentation Fault running asynch fax demo
- Send fax with VFX/40ESC
- sending faxes on d4/pci
- Sending Faxes with ADL Studio
- Sending out caller id information
- Septel and DMN1200 DCM problem
- Septel PCI firmware upgrade
- Septel&D600JCT
- Server hardware
- Server Performance
- Service Update 26 break IPT_ISDN_NI2.CONFIG
- set timeout for an out bound call
- set_iott not working...
- Setting caller ID info for outbound ANALOG CALL
- Setting IE in isdn
- Setting presentation not available on a ISDN PRI outbound call.
- setting the calling number
- setting the number of ring tones in outbound call
- Setting the number of rings on an outbound call
- Setting up a quad span
- Setting up DM/V48A-2T1 with Avaya Definity
- SETUIO FUNCTION ERROR
- Sharing of Dialogic Resources Across Network
- SIEMENS HIPATH 3750 and D42JCTU board - HELP
- Signal Strength
- Sigtran host
- Silence Compression
- Silence Detection on RecordFile
- Simulating a dial tone
- Simulating a PSTN
- simultaneus play/rec with wave driver.
- Singapore Tone Frequency
- Single Board Multiple Protocols
- SIP
- SIP over TCP
- SIU 131 error
- SIU mml problem - NO RESOURCES
- SIU520 minor alarms
- SIU520- sccp configuration
- Slave.vs
- slient fax
- Slow dt_listen/dt_unlisten
- SNMP: No response on Dialogic OIDs
- soft fax problem
- Software drivers question
- solution found
- SOLVED : Topaz vlc.exe and long filenames
- Some API can remove some DTMF tone from a DTI?
- Sound card that can be routed to Dialogic devices
- Sound formats supported by dialogic card
- SPCI4 (SS7) Long Message
- SPCI4 and DM/V2400A
- SPCI4 device driver problem
- SPCI4 link loopback problem
- spcsp record event delay problem
- Speaking Leading Zero
- Speeding up the event-pipe
- SQL interface for T1 cards
- SR 5.1.1 FP1 with Special Patch 15
- SR 6.0 and ISA board
- SR 6.0: ISDN GC Does not work
- SR 6.1.3 not detecting D/120JCT card
- SR4.01 and Windows 2000
- SR5.1 -> SR5.1.1 cannot detect boards
- SR511 and XP
- sr511 Feature Pack
- SR511All.zip
- SR511SP1 not avtodetect DM/V1200-4E1-PCI
- SR511SP1 will not install
- SR6 for ISA -- When, where?
- SR6 NFS eval - where are the GDK Firmware files???
- sr6.0 patches?
- sr_enbhdlr problem
- sr_putstop error on dlstart on Redhat 7.3
- sr_waitevt and select
- SRL Programming in VC# .NET
- ss7 and R2 on same host.
- ss7 link fails
- SS7 pci , B2B simulation problem, pls help
- SS7-ISUP: gc_AcceptCall send ACM. change content?
- SS7/SPCI4 can not up
- SS7/SPCI4 Developement
- SS7/SPCI4 Installation
- SS7HDP4TE , configuration problem
- Start ADL as Service
- start System Service programmatically
- Starting DM/IPLINK0821A-T1_NIC
- Stop waiting?
- Stopping TTS and Voice Playback
- strange crash in libdxxmt.dll
- Strange D-channel trace
- Strange problem
- Streaming audio data(HDSI 480 / DM/V480A-2T1)
- Streaming audio data(HDSI 480 / DM/V480A-2T1)...a couple of notes.
- streaming with ec_stream DM/V480A-2T1
- streaming with playiottdata
- Struggling with T1 outbound dialing with CALLP
- stuttering / truncated prompts
- Stuttering on Dell 2500 with Windows 2003
- Sub devices and channel names
- Support
- Support for DMV boards in HP DL380 G3 servers
- Support for Windows 2003 Server
- Supported WAV formats?
- Sync Vs Async Model on Linux
- synch mode database operation
- Synchronus singlethreaded programming.
- System 5.1.1 download blocked?
- System Hangs on Windows 2000 SP4
- System Release 5.1 for Linux support on RedHat 7.3
- System Release 5.1.1 for D4/PCI
- System Release 5.11 setup
- System Service Startup as non-Admin?
- T1 between D/480JCT-2T1 and rolm 9751 switch
- T1 clock source
- T1 DNIS with transfers
- T1 ESF RBS: bad mix
- T1 ISDN on Unixware SR 3
- T1 link with d/240jct-t1 on erricson msc
- T1 loopback cable?
- T1 network health check
- T1 Rob bit signalling
- T1 Span/DMS100 Config Problem
- Talker32 hang with D/600JCT-2E1, help me
- Tapi and Wave interaction
- TAPI app for FXS on Nortel Meridian
- TAPI Caller ID failure on D/4PCI
- TAPI Object Sample
- TAPI T1-CAS HOOKFLASH
- TAPI with D/300PCIE1
- Tapi-Wave->Full Duplex?
- TDI/481-SC (T1)
- TDM Bus Config
- TDX_ERROR /Record
- TDX_PLAY missing
- Telephony service can't be started
- termination of recording the files
- Test failed on D/480jct-2T1 with GC_Basic_call_mod
- TEST TOPIC -- Please ignore
- Testing
- Testing E1 - E1 - silence on voice channels
- Testing two Dialogic SC back to back
- Text to Speech anyone?
- Text-to-Speech solutions
- The Dialogic System Service service terminated ...
- Third party listening to conversation recording
- Thread safe API?
- Tiff/f conversion software, are there?
- Time-profile of the DLG event-pipe / sr_waitEvt()
- timeout in gc_makecall in asynchoronous mode
- Timeslot Requirements file
- Timing / Clock issues with D/480JCT-2T1
- timing out of dx_dial()
- TM_EOD terminate dx_rec ?
- TM_USRSTOP->What fires this??
- To test the developed application ?
- Tone clamping Problem
- Tone Clamping using Conferencing
- Tone detection
- TONE DETECTion Problem
- tone termination
- Topaz Error CT ADE
- Topaz error:API:R4GcTrunk3 on MakeCall
- Topaz vlc.exe and long filenames
- Training CTADE ASR Sapi5.1
- Transfer a Call To a gateway From MSI Card
- transfer a call, again :)
- transfer calls on the D/240JCT-T1
- Transfer fails on DSE card
- Transfering a call
- translation
- Transmit Time Slot Assignment
- Trouble generating wink :-(
- Trouble getting info digits on PRI 5ESS
- Trouble getting the caller's name
- Trouble making Outbound CT ADE Calls using HMP
- Trouble with tone Generation on DI/0408
- Troublesome ISDN 'PROGRESS' Messages
- Tru64 drivers ?
- TrunkDisconnect
- TrunkMakeCall ..failed... Drivers bug or GC...?
- Trunkside E1 problem in SRL5.1.1
- TTS with CT ADE and a dialogic d/41 JCT-LS
- Tuning AM detection for D/480JCT-2T1
- Tuning PAMD detection on D/600 Springware
- two calls
- Two D/160SC-LS Boards in DOS 7.0
- Two DMV960 boards wont start 'Automatic
- UDD and D/480JCT-2T1
- Unable to make calls , cant hear rings in dx_dial
- unable to open ss7 devices
- understanding dialogic ss7 logs
- Unexpected A and B digits
- uninstalling dialogic
- Unknown GC event on linux sr51 fp1
- UNKNOWN type dialogic board
- Upgradation from SR 5.1.1 SP1 to SR 6.0
- Upgrading old Analog to D/600JCT-2E1
- URGENT Global Call ISDN NET5 In India
- Urgent IPLink: How to use Using Host NIC?
- URGENT! fx_stopch hangs
- Urgent! how to change block_size on linux driver
- URGENT! where to download GC protocol package
- URGENT!! fx_sendfax not implemented on DI0408LSAR2
- URGENT: GCRV_NOANSWER received when fax is busy
- urgent: how to purchase Global DPD software in PRC
- URGENT: SWITCH STATES
- Urgent:Fax send problem for Phone Banking
- using asynchronous call progress analysis
- Using BargeIn
- Using CT ADE with Windows 2003 Server and IIS
- Using DM/IP2431A-T1 Card Running SIP(IPVS Load)
- Using dsp fax for non fax boards
- Using dx_fileopen handle for other i/o calls
- using gc_MakeCall with ISDN
- using information elements in ISDN
- Using IP with DI0408LSAR2i and SR 5.1.1FP1
- Using ISDIAG
- Using pdk_us_fxs_ls_io, BIT pattern is wrong
- Using VB
- Validate number without ringing
- Variable length DNIS in R2MF
- VB Module for Dialogic
- VB.NET and D/4PCI
- vfx/40ESC and Reco
- VFX/41 JCT-LS
- VFX/41JCT-LS and Segmentation Fault
- VFX/41JCT-LS Stability Issue
- VFX/41JCTLS
- VFX/JCT and GammaLink fax, font is very small
- VFX/PCI on Windows 2003 Server
- VFX41JCT-LS hanging after 0x0107
- VFX41JCTLS drivers
- Visual Studio.NET
- visual voice pro 5 bug
- Visual Voice Pro still available?
- voice bus conference problem in D/41JCT-LS
- voice demos don't work
- Voice Detection and IPLink
- Voice device must be attached to the line device
- Voice files
- voicebocx 5.2 and D/120JCT
- VoiceBocx.AnswerCall hanging forever
- VoiceBocx.AnswerCall() hang problem
- VoiceBocx/CT ADE Error Event Question
- VoiceBrick - Comdial Debut or KeyVoice - NEED HELP
- VOIP config for D240SC rev 1
- volume after using nr_scroute
- VOS job
- VOS Memory leak
- vos6w
- VOX (ADPCM) decoding problem
- VR sample with Microsoft speech sdk 5.1
- waiting for beep after PAMD
- WAVE Driver Problem
- we want to configured the alcatel A4400 lineside
- Welcome to Dialogics new Web Discussion
- What are the changes in CTADE 8.3 Update?
- WHAT DLLS
- What does 'loop current reversal' mean?
- What does dx_gtsernum() on HMP return?
- What fax API can be used with D/300 SC-E1 boards?
- What is 'CCEV_DISCONNECT = 21C
- What is 'loop current'?
- What is cadence break?
- What is ccev_disconnect =264
- What is normal behavior for the d42demo?
- What is proper way to wait for TD42_ASYNCCALLID?
- What kind of borad do I need?
- what libraries to use for d/4pci
- What's the knob for in P/4PCI?
- When will D/82JCT support NEC?
- WHERE IS NR_SCROUTE FUNCTION
- Where to download firmware
- where to download isctr4 ?
- where to download release 2 for SCO openserver
- where to find gcc 2.96.107 and glibc 2.2.5-27?
- Which API to be use
- Which Intel Dialogic fax boards can support DID?
- Which media load to specify when using SS7?
- Which method to be use
- which product for conference mixer
- White noise in conferences
- Why doesn't it compile correctly in chart mode?
- why get more than one MSMM_RNGOFFHK?
- Why is this Congestion on line
- Why the Dialogic Service become to start so slowly
- Wierd Hangup Detection Problem
- WIINDOWS XP AND D/4PCI
- will redhat enterprise server be supported ?
- Win 2003 Server Support
- Windows 2003
- Windows 2003 Sentinel drivers - Problem
- Windows 2003 Server
- Windows 2003 support for CPi/400-PCI fax cards?
- Windows 2003 support with SR 5.1.1
- windows xp d4pci tapi and wave driver install
- Wink not detected in 5.1 FP2 outbound calls ?
- wrong tonality are not identified by dialogic
- WSB0008: Error locating board ID 0 at address D800
- yellow mark in device manager(D4PCI)
- Last message date: Fri Jul 15 2005 - 10:05:21 EDT
- Archived on: Sat Jul 16 2005 - 03:48:35 EDT